A special elevator access control unit is an elevator access control with a card reader used to determine the floors that can be reached based on the door access control credential. For example, all the accountants who work on the 5th floor can reach that floor, but not be able to go to the IT department on the 3rd floor. Floors that contain general areas such as cafeteria or fitness center, would typically be available to everyone. The system can also be programmed to allow certain people, such as the executives to go to any floor.
The elevator access security system consists of a door access control reader in the elevator, an elevator control unit, and special elevator control software
Designing specifically for elevator control, the EC10 panel and EX16 floor extension boards provide customers with the most secure, scalable, versatile, and affordable access control solutions available today.
Floor access can be restricted based on various user credentials, including fingerprint, proximity card, and/or password. Pre-defined time schedules can also be used to control floor access. During normal visits/business hours, unrestricted floor access can also be permitted
(aka Passage mode).
The EC10 Elevator Control Panel can restrict access up to ten floors. The EX16 Elevator Floor Extension Board restricts access up to an additional sixteen floors. Each EC10 can support up to three EX16 boards. When combined together, a total of fifty-eight (58) floors can be controlled with a single EC10 bundle. Note that EC10 panels can be daisy-chained together to control as many floors as desired. Our powerful yet easy-to-use software makes the Elevator Control System very easy to manage. SDK is available for software companies that desire to integrate with the system.
vDimension (L×D×H) :160mm×106mm
Capacity
Communication
Power
Supported Options
Wiegand Card Readers. 125kHz EM or 13.56MHz IC card reader. Wiegand interface.
Features
Read Range
Reading Time
Input Port
Output Format
Power/Current
LED
Operating Temperature
Material
Operating Humidity
Beeper
Index of Protection
Standard Features
Optional Features
Communication
CR20 Series are accessories designed to read (CR20E/M) & write
(CR20M/W) proximity cards. They are connected to a PC through
USB Port (Plug & play). They allow high-speed transactions and
incorporate LED indicators. CR20M/W includes communication
protocol for development and it’s compatible with S.O Windows 32
bits. CR20E and CR20M are compatible with Windows S.O. and read
the same serial number as ZKTeco devices.
CR20E
CR20M/W
CR20M